The production method of phosphorus Basic Copper Sulphate (WSDTY) was horizontal continuous casting. The pellets were cleaned and packaged. Horizontal continuous casting. It is based on the Basic Copper Sulphate horizontal continuous casting process, and this process has many shortcomings:
(1) The energy consumption is large, and the power consumption per ton of phosphor bronze is more than 500 kWh.
(2) The output is low. Because it is a batch production method, the primary molten copper is only about 2 tons. After the discharge, it needs to be reheated and the production capacity is low.
(3) The phosphorus content is difficult to control, because at that time, the horizontal continuous casting used in the horizontal continuous casting furnace, the phosphorus element is easily volatilized, and the uniformity in the copper solution is poor.
In the first few years of the introduction of phosphorous Basic Copper Sulphate production technology, its batch molding products only have cylindrical phosphor bronze particles of 025mm~25mm. At present, some hardware manufacturers are also using them.
Wujiang Weishida Copper Technology Co.,Ltd. has 12,000 square meters of production base. By virtue of their sincere cooperation, reciprocity of the business philosophy for the industry users around the country to provide high-quality non-ferrous metal products. Weishida specializes in producing cuprous chloride, basic copper carbonate, copper acetate, copper oxide, copper sulfate. Our company has established a perfect quality assurance system, quality inspection and testing equipment, testing, testing and technology development strength, to ensure the stability of product quality, fully able to meet the pre-market after-sales service to provide users with the need.
Click Cuprous Chloride to learn about more information